| Part number: | ICL7650SCPD |
| Description: | 30mA per Channel 4pA 140 dB Instrumentational OP Amps 0.00002μA 9V 14 Pins DIP |
| Manufacturer | Intersil (Renesas Electronics America) |
| Encapsulation | - |
| Quantity | 3963 |
| RoHS | YES |
| TYPE | DESCRIPTION |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 14 |
| Published | 1999 |
| JESD-609 Code | e0 |
| Part Status | Discontinued |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Operational Amplifier |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 16V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 2mA |
| Nominal Supply Current | 2mA |
| Slew Rate | 2.5 V/μs |
| Architecture | CHOPPER-STAB |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 140 dB |
| Current - Input Bias | 4pA |
| Output Current per Channel | 30mA |
| Input Offset Voltage (Vos) | 700μV |
| Bandwidth | 2MHz |
| Gain Bandwidth Product | 2MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 2000 kHz |
| Voltage Gain | 150dB |
| Average Bias Current-Max (IIB) | 0.00002μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Power | NO |
| Number of Amplifiers | 1 |
| Height | 4.95mm |
| Length | 19.68mm |
| Width | 7.11mm |
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
|
We'll get back to you as soon as possible.
Please include any specific details such as part number(s) or order number. |
Need Help?
Contact Us
